List of Tools and Materials For Michael Shacham's Sculpture Class

1.

1”x [1/2” Diameter x 18” long, water pipe black or galvanized steel , Threaded on both ends. ]*

2.

1”x [!/2” Diameter x 6” long water pipe black or galvanized steel  , threaded on both ends.]

3.

1” x [1/2” Diameter flange black or galvanized steel, with 4 # 12 flat head screws x 3/4” long.]

4.

1”x [1/2” Diameter elbow black or galvanized steel.]

5.

1” x [1/2” Diameter tee, black or galvanized steel .]

6.

One piece of plywood, at least 3/4” thick and 16” wide x 16” long.

7.

One “C” clamp

8.

One Roll of 3/16” Aluminum Wire**

9.

One roll of 1/16” Aluminum Wire

10.

Plasticine about 6 to 8 Lbs. Depending on the size of your sculpture. [you can get it from me at $3.00 a pound]

Tools

11.

A Hammer

12.

A Screw driver

13.

Sculpture Tools, you could borrow from me if you do not have any of your own, and than see what you like to work with, and buy those tools.

14.

A Clamp to hold your work to the turntable.

* If you wish to work smaller, you may use a 12” pipe instead of the 18” one. **If you wish to work larger you may use 1/4" Aluminum wire in place of the 3/16" listed.